ESCPUTIL(1) Version 5.3.4 ESCPUTIL(1)
Gutenprint Manual Pages Gutenprint Manual Pages
06 Dec 2020
NAME
escputil - maintain Epson Stylus inkjet printers
SYNOPSIS
escputil [ -P printer | -r device ] [ -m model ] [ -u ] [ -c | -n | -a
| -i | -d | -o | -s | -l | -M | -h ] [ -q ]
DESCRIPTION
escputil is a command line utility to perform various maintenance
tasks on Epson Stylus inkjet printers. These tasks include head
alignment, head cleaning, nozzle check, printer identification, and
retrieval of ink level from the printer.
OPTIONS
escputil accepts the following options:
-P, --printer-name=printer
Specify the name of the printer to operate on. The default is
the default system printer.
-r, --raw-device=device
Specify the name of the device to write to directly rather than
going through a printer queue. You must use this (rather than
specifying a printer) when retrieving ink levels or identifying
the printer, or if you wish to perform head alignment without
specifying the printer model.
-m, --model=model
Specify the precise printer model for head alignment.
-u, --new
The printer is a new printer (Stylus Color 740 or newer).
-c, --clean-head
Clean the print head. This can also be performed from the
printer front panel.
-n, --nozzle-check
Print a nozzle test pattern. Dirty or clogged nozzles will show
as gaps in the pattern. If you see any gaps, you should run a
head cleaning pass or two.
-a, --align-head
Align the print head. CAUTION: Misuse of this option may result
in poor print quality and/or damage to the printer. You must
either specify the printer model with the -m option, or use the
raw printer device to allow escputil to detect the printer model.
-i, --ink-level
- 1 - Formatted: November 14, 2024
ESCPUTIL(1) Version 5.3.4 ESCPUTIL(1)
Gutenprint Manual Pages Gutenprint Manual Pages
06 Dec 2020
Obtain the ink level from the printer. This requires read/write
access to the raw printer device.
-d, --identify
Query the printer for make and model information. This requires
read/write access to the raw printer device.
-o, --align-color
Align the color print head (used by Stylus Color 480 and 580
only). CAUTION: Misuse of this option may result in poor print
quality and/or damage to the printer.
-s, --status
Retrieve printer status.
-l, --license
Display the license/warranty terms of this program.
-M, --list-models
List the supported printer models.
-h, --help
Display a list of all command line options.
-q, --quiet
Suppress the banner.
BUGS
USB-connected printers sometimes fail to identify or return ink
levels. You may have to repeat the command. This is probably a
timing issue in escputil, not a flaw in the printer.
Anything requiring bidirectional communication with the printer
(identify, ink levels, or head alignment without specifying the
printer model) requires read/write access to the printer port (for
example /dev/lp0). This may require these operations to be performed
as root. In addition, kernel support is required for bidirectional
communication. For Linux version 2.2, CONFIG_PRINTER_READBACK should
be enabled; this is called CONFIG_PARPORT_1284 on 2.4 and later
kernels.
If the printer is performing self-test or head cleaning on power up,
the identify and ink level commands will time out, although the
printer successfully receives the command. The command will need to
be reissued when the printer is quiescent.
AUTHORS
Robert Krawitz.
- 2 - Formatted: November 14, 2024
ESCPUTIL(1) Version 5.3.4 ESCPUTIL(1)
Gutenprint Manual Pages Gutenprint Manual Pages
06 Dec 2020
COPYRIGHT
Copyright c 2000 Robert Krawitz (rlk@alum.mit.edu)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or (at
your option) any later version.
OTHER INFORMATION
The homepage of the Gutenprint project from which this utility was
contributed is located at http://gimp-print.sourceforge.net/.
SEE ALSO
lp(4), tunelp(8).
- 3 - Formatted: November 14, 2024
